InicioIndustria de papel y cartonInstrumentos de mediciónProbador de suavidad
titulo

Probador de suavidad
IP-0018

Cotizar

 

El probador de suavidad está diseñado según el método Bekk para medir el grado de suavidad en papeles y cartones.

The meter is designed according to measuring (Buick method) of GB/T456-1989 paper and cardboard smoothness and it is applied to measure smoothness of paper and cardboard, but not proper to measure the sheet above 0.5mm or with freer air permeability.
 
The meter borrows high accuracy vacuum sensor to test the vacuum, replace the mercury compression, so it is the flatness meter with no mercury. The meter use German vacuum equipment to vacuumize the container in a short time, which is controlled by microprocessor. It has powerfull data processing, not only can test a sample and automatically store the result, but also analyze group of specimens to show the average, maximum, minimum, standard drift and variation ratio. All the results can be stored and displayed by LCD. In addition, it can print out the data in the requirement of experiment report according to GB/T456-1989.
 
Main technical character:
1. Glass board: donut, dimension: Big diameter 37.4±0.05mm, small diameter 11.3±0.05mm, valid dimensions 10±0.05cm²
2. Compression board: flat circle board with diameter 45mm, touching specimen with pressure (100±2Kpa)
3.  Rubber pad: thickness 4±0.2mm, maximum variation of thickness±0.05mm, hardness 40±5 IRHD(International Rubber Hardness)
4.  Small vacuum container: bulk 380±1mL
5.  Big vacuum container: bulk 38±1mL
 

 

otros productos

Probador de suavidad

Probador de suavidad

Probador de suavidad para papel higienico, non woven, pañuelos desechables

Nuestra Empresa

Productos

Compras

Varios

Copyright © 2012 Representaciones